Standards Plan
Below is a list of standards in development by industry segment.
See a breakdown of standards in pre-ballot, ballot, and editing: Chart Standards
For the best experience, please view on full-size desktop
Committee | Pub. Type | Pub. No | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
---|---|---|---|---|---|---|---|
CRE | RP | 552 | Transmission Systems | 2 | X | ||
CRE | Std | 579 | Fitness-For-Service | 2 | X | ||
CRE | Std | 650-A4 | Addendum 4 to Welded Steel Tanks for Oil Storage | 10 | X | ||
COSFP | RP | 2510A | Fire Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Storage Facilities | 3 | X | ||
CRE | Std | 672-E1 | Errata to Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services | 4 | X | ||
GCM | RP | 1639 | Owner/Operator's Guide to Operation and Maintenance of Vapor Recovery Systems at Gasoline Dispensing Facilities | 2 | X | ||
CRE | Std | 650-A3 | Addendum 3 to Welded Tanks for Oil Storage | 11 | X | ||
CRE | RP | 540 | Electrical Installations in Petroleum Processing Plants | 5 | X | ||
COSFP | RP | 2030 | Application of Fixed Water Spray Systems for Fire Protection in the Petroleum and Petrochemical Industries | 4 | X | ||
CRE | RP | 687 | Rotor Repair | 2 | X | ||
CRE | Std | 618 | Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services | 6 | X | ||
CRE | Std | 653-A2 | Tank Inspection, Repair, Alteration, and Reconstruction | 4 | X | ||
CRE | Std | 565 | Thermal Reactors for Sulfur Recovery Units in General Refinery Service | 1 | X | ||
CRE | RP | 934-F | Minimum Pressurization Temperatures, MPT, for Heavy Wall Pressure Vessels | 1 | X | ||
CRE | TR | 934-H | Inspection, Assessment, and Repair of Heavy Wall Reactor Vessels in High Temperature, High Pressure Hydrogen Service | 1 | X | ||
CRE | RP | 945 | Avoiding Environmental Cracking in Amine Units | 4 | X | ||
CRE | Std | 561 | Reforming Furnaces for Hydrogen and Syngas Production | 1 | X | ||
CRE | Std | 534 | Heat Recovery Steam Generators | 3 | X | ||
CRE | Std | 669 | Heat Recovery Systems | 1 | X | ||
CRE | RP | 545 | Lightning Protection for Aboveground Storage Tanks | 2 | X | ||
CRE | RP | 697 | Pump Repair | 1 | X | ||
CRE | Std | 810 | Welded Plate-Block Heat Exchangers | 1 | X | ||
CRE | Std | 685 | Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Services | 3 | X | ||
CRE | Std | 617 | Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services | 9 | X | ||
CRE | RP | 554-Part 2 | Process Control Systems-Process Control System Design | 2 | X | ||
CRE | Std | 535 | Burners for Fired Heaters in General Refinery Services | 4 | X | ||
CRE | Std | 546 | Brushless Synchronous Machines-500 kVA and Larger | 4 | X | ||
CRE | RP | 686 | Machinery Installation and Installation Design | 3 | X | ||
CRE | Std | 611 | General Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services | 6 | X | ||
CRE | Std | 682 | Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps | 5 | X | ||
CRE | Std | 616 | Gas Turbines for the Petroleum, Chemical and Gas Industry Services | 6 | X | ||
CRE | RP | 553 | Refinery Valves and Accessories for Control and Safety Instrumented Systems | 3 | X | ||
CRE | RP | 581 | Risk-Based Inspection Methodology | 4 | X | ||
CRE | Std | 624 | Type Testing of Rising Stem Valves Equipped with Flexible Graphite Packing for Fugitive Emissions | 2 | X | ||
CRE | RP | 582 | Welding Guidelines for the Chemical, Oil, and Gas Industries | 4 | X | ||
CRE | Std | 660 | Shell-and-Tube Heat Exchangers | 10 | X | ||
CRE | Std | 661 | Petroleum, Petrochemical, and Natural Gas Industries—Air-Cooled Heat Exchangers for General Refinery Service | 8 | X | ||
CRE | RP | 651 | Cathodic Protection of Aboveground Storage Tanks | 5 | X | ||
CRE | Std | 530 | Calculation of Heater-tube Thickness in Petroleum Refineries | 8 | X | ||
CRE | Std | 673 | Centrifugal Fans for Petroleum, Chemical and Gas Industry Services | 4 | X | ||
CRE | RP | 688 | Pulsation and Vibration Control in Positive Displacement Machinery Systems for Petroleum, Petrochemical, and Natural Gas Industry Services | 2 | X | ||
CRE | API | 555 | Process Analyzers | 4 | X | ||
CRE | RP | 556 | Instrumentation, Control, and Protective Systems for Gas Fired Heaters | 3 | X | ||
CRE | RP | 500 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | 4 | X | ||
CRE | RP | 572 | Inspection Practices for Pressure Vessels | 5 | X | ||
CRE | Std | 2000 | Venting Atmospheric and Low-pressure Storage Tanks | 8 | X | ||
COSFP | RP | 2201 | Safe Hot Tapping Practices in the Petroleum and Petrochemical Industries | 6 | X | ||
COSFP | RP | 2009 | Safe Welding, Cutting and Hot Work Practices in the Petroleum and Petrochemical Industries | 8 | X | ||
CRE | RP | 615 | Valve Selection Guide | 3 | X | ||
CRE | Std | 619 | Rotary-Type Positive Displacement Compressors for Petroleum, Petrochemical and Natural Gas Industries | 6 | X | ||
GCM | RP | 1595 | Design, Construction, Operation, Maintenance, and Inspection of Aviation Pre-Airfield Storage Terminals | 3 | X | ||
CRE | Std | 598 | Valve Inspection and Testing | 11 | X | ||
CRE | Std | 607 | Fire Test for Quarter-turn Valves and Valves Equipped with Non-Metallic Seats | 8 | X | ||
CRE | Std | 602 | Gate, Globe, and Check Valves for Sizes DN 100 (NPS 4) and Smaller for the Petroleum and Natural Gas Industries | 11 | X | ||
CRE | API | 510 | Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration | 11 | X | ||
CRE | Std | 526 | Flanged Steel Pressure-relief Valves | 8 | X | ||
RPSG | RP | 752 | Management of Hazards Associated with Location of Process Plant Permanent Buildings | 4 | X | ||
RPSG | RP | 753 | Management of Hazards Associated with Location of Process Plant Portable Buildings | 2 | X | ||
RPSG | RP | 756 | Management of Hazards Associated with Location of Process Plant Tents | 2 | X | ||
CRE | TR | 656 | Aboveground Storage Tank Operations during Uncontrollable Environmental Events | 1 | X | ||
CRE | Std | 641 | Type Testing of Quarter-turn Valves for Fugitive Emissions | 2 | X | ||
CRE | Std | 663 | Hairpin-type Heat Exchangers | 2 | X | ||
CRE | TR | 558 | Standard Critical Definitions for Instrumentation and Controls | 1 | X | ||
CRE | Std | 625 | Tank Systems for Refrigerated Liquefied Gas Storage | 2 | X | ||
CRE | Std | 674 | Positive Displacement Pumps-Reciprocating | 4 | X | ||
CRE | Std | 570 | Piping Inspection Code: In service Inspection, Rating, Repair, and Alteration of Piping Systems | 5 | X | ||
CRE | RP | 586 | NDE Methodology for Specific Cases | 1 | X | ||
CRE | RP | 574 | Inspection Practices for Piping System Components | 5 | X | ||
CRE | RP | 576 | Inspection of Pressure-relieving Devices | 5 | X | ||
CRE | RP | 580 | Risk-Based Inspection | 4 | X | ||
CRE | RP | 578 | Guidelines for a Material Verification Program (MVP) for New and Existing Assets | 4 | X | ||
GCM | API | 1509-A1 | Engine Oil Licensing and Certification System (Addendum 1) | 20 | X | ||
CRE | TR | 522 | Pressure Relief Systems Calculations | 1 | X | ||
CRE | Spec | 12P | Specification for Fiberglass Reinforced Plastic Tanks | 5 | X | ||
CRE | Std | 982 | Inspection and Assessment of Refractory Linings | 1 | X |
For the best experience, please view on full-size desktop
Committee | Pub. Type | Pub. No | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
---|---|---|---|---|---|---|---|
COPS | RP | 1130 | Computational Pipeline Monitoring for Liquids | 2 | X | ||
COPM | Ch. | 14.3.1 | Concentric, Square-Edged Orifice Meters, Part 1—General Equations and Uncertainty Guidelines (includes Errata dated July 2013) (ANSI/API MPMS 14.3.1) (AGA Report No. 3, Part 1) | 4 | X | ||
COPM | Ch. | 11.1 | Source Code | 2004 | X | ||
COPM | Ch. | 19.3, Part H | Specification for Establishing Evaporative Loss Factors for Floating-roof Tank Devices | 2 | X | ||
COPM | Ch. | 22.5 | Testing Protocols—Electronic Flow Computer Calculations | 1 | X | ||
COPM | Ch. | 20.6 | Recommended Practice for Production Allocation Methodologies and Techniques | 1 | X | ||
COPM | Ch. | 20.1 | Production Measurement and Allocation Systems | 2 | X | ||
GCOP | RP | 1161-A3 | Recommended Practice for Pipeline Operator Qualification | 2 | X | ||
COPM | Ch. | 17.9 | Vessel Experience Factor (VEF), Addendum 1 | 2 | X | ||
COPM | Ch. | 2.4 | Measurement and Calibration of Tank Cars (formerly Std 2554) | 1 | X | ||
COPM | Ch. | 4.9.1 | Methods of Calibration for Displacement and Volumetric Tank Provers, Part 1—Introduction to the Determination of the Volume of Displacement and Tank Provers | 2 | X | ||
COPS | RP | 1162 | Public Awareness Programs for Pipeline Operators | 3 | X | ||
COPM | Ch. | 4.2 | Displacement Provers | 4 | X | ||
COPM | Ch. | 12.4.1 | Calculation of Petroleum – Base Prover Quantity Calibration – Waterdraw Method (superseding Ch. 12.2.4) | 1 | X | ||
COPM | Ch. | 12.4.2 | Calculation of Petroleum – Base Prover Quantity Calibration – Master Meter Method (supersedes Ch. 12.2.5) | 1 | X | ||
COPM | Ch. | 12.4.3 | Calculation of Petroleum – Prover Quantity Calibration – Gravimetric Method | 1 | X | ||
COPM | Ch. | 17.2 | Measurement of Cargoes on Board Tank Vessels | 3 | X | ||
COPM | Ch. | 20.3 | Measurement of Multiphase Flow (supersedes RP 86) | 2 | X | ||
COPM | Ch. | 21.2 | Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | 2 | X | ||
COPM | Ch. | 10.10 | Continuous on-line Measurement of Water In Petroleum (Crude Oil and Condensate) | 1 | X | ||
COPM | Ch. | 14.13 | Fuel Gas Measurement | 1 | X | ||
COPS | RP | 1165 | Pipeline SCADA Displays | 2 | X | ||
COPM | Ch. | 5.8 | Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters | 3 | X | ||
COPM | Ch. | 21.1 | Electronic Gas Measurement | 3 | X | ||
COPS | RP | 1170 | Design and Operation of Solution-mined Salt Caverns Used for Natural Gas Storage | 2 | X | ||
COPS | RP | 1171 | Functional Integrity of Natural Gas Storage in Depleted Hydrocarbon Reservoirs and Aquifer Reservoirs | 2 | X | ||
COPM | Ch. | 6.4A | Lease Automatic Custody Transfer (LACT) Systems (supersedes Ch. 6.1) | 1 | X | ||
COPM | Ch. | 14.1 | Collecting and Handling of Natural Gas Samples for Custody Transfer | 8 | X | ||
COPM | Ch. | 20.4 | Phase Behavior Applications in Upstream Measurement | 1 | X | ||
COPM | Ch. | 9.1 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method(ASTM D1298) | 4 | X | ||
COPM | Ch. | 9.3 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method(ASTM D6822) | 4 | X | ||
COPS | RP | 1175 | Pipeline Leak Detection - Program Management | 2 | X | ||
COPM | Ch. | 2.3 | Calibration of Spheres and Spheroids (supersedes Std 2552) | 1 | X | ||
COPM | Ch. | 14.14 | Venturi Metering of Natural Gas and Other Related Hydrocarbon Fluids | 1 | X | ||
COPM | Ch. | 10.9 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration(ASTM D4928) | 4 | X | ||
COPM | Ch. | 17.6 | Guidelines for Determining Fullness of Pipelines Between Vessels and Shore Tanks | 3 | X | ||
COPM | Ch. | 19.5 | Atmospheric Hydrocarbon Emissions from Marine Vessel Transfer Operations(formerly Publication 2514A) | 2 | X | ||
COPS | RP | 1176 | Assessment and Management of Cracking in Pipelines | 2 | X | ||
COPM | Ch. | 14.3.2 | Concentric, Square-Edged Orifice Meters, Part 2—Specification and Installation Requirements (ANSI/API MPMS 14.3.2-20XX) (AGA Report No. 3, Part 2) | 6 | X | ||
COPS | RP | 1185 | Pipeline Public Engagement | 1 | X | ||
COPM | TR | 25XX | Measurement of Produced Water for Custody Transfer | 1 | X | ||
RP | 1108 | Strain-based Engineering Critical Assessment of Girth Welds | 1 | X | |||
COPS | RP | 1186 | Pipeline Process Safety | 1 | X | ||
COPM | Ch. | 22.7 | Testing Protocol for Multi-Phase Meters | 1 | X | ||
COPS | TR | 1189 | Internal Corrosion in Pipeline Facilities | 1 | X | ||
COPM | Ch. | 17.11 | Measurement and Sampling of Liquid Hydrocarbon Cargoes Using Closed and Restricted Equipment | 3 | X | ||
COPM | Ch. | 22.4-A1 | Testing Protocols—Pressure, Differential Pressure, and Temperature Measuring Devices | 1 | X | ||
COPM | Ch. | 13.2 | Statistical Methods of Evaluating Meter Proving Data | 3 | X | ||
COPM | Ch. | 17.10.2 | Measurement of Cargoes on Board Marine Gas Carriers, Part 2—Liquefied Petroleum and Chemical Gases | 3 | X | ||
COPM | Ch. | 23.1 | Reconciliation of Liquid Pipelines | 2 | X |
For the best experience, please view on full-size desktop
Committee | Pub. Type | Pub. No | Title | Ed. | Pre-Ballot Phase | Ballot Phase | In Editing |
---|---|---|---|---|---|---|---|
CSOEM | RP | 2L-1 | Planning and Designing Helidecks | 5 | X | ||
CSOEM | TR | CTDP | 2004 Report of Eastern/Western Hemisphere Production of Casing, Tubing and Drill Pipe | 2004 | X | ||
CSOEM | TR | CTDP | 2004 Report of Eastern/Western Hemisphere Production of Line Pipe | 2004 | X | ||
CSOEM | Spec | 7-A2 | Addendum 2 to Rotary Drill Stem Elements | 40 | X | ||
CSOEM | Spec | 6A-A1 | Addendum 1 to Specification for Wellhead and Christmas Tree Equipment - Revised Annex O | 19 | X | ||
CSOEM | RP | 2SM-A1 | Addendum 1 to Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | 1 | X | ||
CSOEM | RP | 5L7 | Recommended Practice for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe | 3 | X | ||
CSOEM | RP | 5L2 | Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service | 5 | X | ||
CSOEM | RP | 5L8 | Field Inspection of New Line Pipe | 3 | X | ||
CSOEM | RP | 15TL4 | Care and Use of Fiberglass Tubulars | 3 | X | ||
CSOEM | Spec | 5L-A3 | Specification for Line Pipe (includes Errata 1, dated January 2009 and Addendum 1, dated February 2009) | 44 | X | ||
CSOEM | RP | 11BR | Care and Handling of Sucker Rods | 10 | X | ||
CSOEM | RP | 17O-A1 | Recommended Practice for High Integrity Pressure Protection Systems (HIPPS) | 1 | X | ||
CSOEM | Spec | 6D-A3 | Addendum 3 to Specification for Pipeline Valves | 23 | X | ||
CSOEM | Spec | 11AX-A2 | Specification for Subsurface Sucker Rod Pumps and Fittings | 12 | X | ||
CSOEM | RP | 2SK | Design and Analysis of Stationkeeping Systems for Floating Structures | 4 | X | ||
CSOEM | Std | 17G1 | System Configuration and Operation of Subsea Well Intervention Systems | 1 | X | ||
CSOEM | RP | 17G2 | Recommended Practice for Subsea Pumping Well Intervention Systems | 1 | X | ||
CSOEM | RP | 17G4 | Recommended Practice for Subsea Riserless Light Well Intervention Systems | 1 | X | ||
CSOEM | Spec | 11B | Sucker Rods and Rod Related Products | 28 | X | ||
CSOEM | TR | 17TR14 | Workover/Intervention Guidance for Global Riser Analysis | 1 | X | ||
CSOEM | Spec | 16B | Coiled Tubing, Snubbing, and Wireline Well Control Stack Equipment | 1 | X | ||
CSOEM | RP | 17Y | Recommended Practice for Design, Testing and Qualification of Subsea Chemical Injection Delivery Systems | 1 | X | ||
CSOEM | RP | 17Z | Medium Voltage Equipment Used on Subsea Production Systems | 1 | X | ||
CSOEM | RP | 5A3 | Thread Compounds for Casing, Tubing, Line Pipe, and Drill Stem Elements | 4 | X | ||
CSOEM | Spec | 5CRA | Corrosion Resistant Alloy Seamless Tubes for Casing, Tubing, and Coupling Stock | 2 | X | ||
CSOEM | RP | 5L1 | Railroad Transportation of Line Pipe | 8 | X | ||
CSOEM | RP | 5LW | Transportation of Line Pipe on Barges and Marine Vessels | 4 | X | ||
CSOEM | Spec | 5LCP | Coiled Line Pipe | 3 | X | ||
CSOEM | Spec | 7-1 | Rotary Drill Stem Elements | 2 | X | ||
CSOEM | RP | 7G-1 | Drill Stem Design and Operating Limits | 17 | X | ||
CSOEM | RP | 7L | Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment | 2 | X | ||
CSOEM | Spec | 16RCD | Rotating Control Devices | 3 | X | ||
CSOEM | Std | 20R | Qualification of Suppliers of Subsurface Electronics for Use in the Petroleum and Natural Gas Industries | 1 | X | ||
CSOEM | Spec | Q1 | Quality Management System Requirements for Product-Related Organizations for the Petroleum and Natural Gas Industry | 10 | X | ||
DPOSC | RP | 78 | Wellbore Surveying and Positioning | 1 | X | ||
CSOEM | Spec | 15LE | Polyethylene (PE) Line Pipe | 5 | X | ||
CSOEM | RP | 1PSR | Preservation of Electrical, Mechanical, and Control Equipment during Procurement and Construction --PROJECT CANCELLED-- | 1 | X | ||
DPOSC | Bull | 4565 | Species and Habitat Conservation Practices | 1 | X | ||
CSOEM | Std | 20P | Qualification of Suppliers for Plating and Coating used in the Petroleum and Natural Gas Industries | 1 | X | ||
CSOEM | Spec | 8C | Drilling and Production Hoisting Equipment (PSL 1 and PSL 2) | 6 | X | ||
CSOEM | RP | 2GEN | General Requirements for Offshore Structures | 1 | X | ||
DPOSC | RP | 92C | Managed Pressure Drilling Operations--Controlled Mud Level (CML) | 1 | X | ||
DPOSC | RP | 79-1 | Tripping Operations in Hydrostatically Overbalanced Wells | 1 | X | ||
CSOEM | Spec | 16A | Specification for Drill-through Equipment | 5 | X | ||
CSOEM | Std | 16AS | Integration of Subsea BOP Equipment Systems for Drilling Wells | 1 | X | ||
CSOEM | RP | 16FR | Repair and Remanufacture of Marine Drilling Riser Equipment | 1 | X | ||
CSOEM | RP | 59 | Well Control Operations | 3 | X | ||
CSOEM | Std | 6DHP | Pipeline Valves for High Pressure Service | 1 | X | ||
CSOEM | Spec | 16A-A2 | Specification for Drill-through Equipment | 4 | X | ||
CSOEM | TR | 19G12 | Gas Lift Surveillance, Automation and Control Systems | 1 | X | ||
CSOEM | Spec | 16A-A3 | Specification for Drill-through Equipment | 4 | X | ||
CSOEM | RP | 13B-2 | Field Testing Oil-based Drilling Fluids | 6 | X | ||
CSOEM | RP | 13C | Drilling Fluid Processing Systems Evaluation | 6 | X | ||
CSOEM | Spec | 19ICV | Interval Control Valves | 1 | X | ||
CSOEM | RP | 2MET-A1 | Metocean Design and Operating Considerations | 1 | X | ||
CSOEM | Spec | 5B | Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads | 17 | X | ||
CSOEM | RP | 11AR | Recommended Practice for Care and Use of Subsurface Pumps | 5 | X | ||
CSOEM | Spec | 11P | Specification for Packaged Reciprocating Compressors for Oil and Gas Production Services | 3 | X | ||
CSOEM | RP | 19G13 | Challenging Gas-lift Applications | 1 | X | ||
CSOEM | RP | 19G14 | Gas-lift for Gas Well Deliquification | 1 | X | ||
CSOEM | Spec | 11E | Specification for Pumping Units | 20 | X | ||
CSOEM | Spec | 19PT | Downhole Perforating Tools | 1 | X | ||
CSOEM | Spec | 19G15 | Conventional Flow Control Devices | 1 | X | ||
CSOEM | RP | 17B | Recommended Practice for Flexible Pipe | 6 | X | ||
CSOEM | Spec | 17J | Specification for Unbonded Flexible Pipe | 5 | X | ||
CSOEM | RP | 17R | Recommended Practice for Flowline Connectors and Jumpers | 2 | X | ||
DPOSC | Spec | 12J | Oil and Gas Separators | 9 | X | ||
CSOEM | Std | 19C | Measurement of and Specifications for Proppants Used in Hydraulic Fracturing and Gravel-packing Operations | 3 | X | ||
CSOEM | TR | 13TR1-A1 | Stress Corrosion Cracking of Corrosion Resistant Alloys in Halide Brines Exposed to Acidic Production Gas | 1 | X | ||
CSOEM | RP | 11S1 | Electrical Submersible Pump Dismantle, Inspection and Failure Analysis | 4 | X | ||
CSOEM | Spec | 11AX | Subsurface Sucker Rod Pump Assemblies, Components and Fittings | 14 | X | ||
CSOEM | Spec | 14A | Subsurface Safety Valve Equipment | 13 | X | ||
CSOEM | Spec | 19E | Downhole Electronic Components | 1 | X | ||
CSOEM | RP | 16WL | Wireline Pressure Control Equipment Systems for Cased Hole | 1 | X | ||
CSOEM | RP | 16CBM | Condition Based Maintenance Systems | 1 | X | ||
CSOEM | RP | 16FI | Frac Iron Inspections | 1 | X | ||
CSOEM | RP | 16SP | BOP Shear Ram Performance Test Protocol (Formerly 16TR1) | 1 | X | ||
CSOEM | Spec | 17E | Specification for Subsea Umbilicals | 6 | X | ||
CSOEM | Std | 17F | Standard for Subsea Production Control Systems | 5 | X | ||
CSOEM | Std | 6ACRA | Age-Hardened Nickel-Based Alloys for Oil and Gas Drilling and Production Equipment | 2 | X | ||
CSOEM | Spec | 20E | Alloy and Carbon Steel Bolting for use in the Petroleum and Natural Gas Industries | 3 | X | ||
CSOEM | Std | 20J | Qualification of Distributors of Metallic Materials for Use in the Petroleum and Natural Gas Industries | 2 | X | ||
CSOEM | Spec | 11B-A1 | Sucker Rods and Rod Related Products | 28 | X | ||
CSOEM | Spec | 7K | Drilling and Well Servicing Equipment | 7 | X | ||
CSOEM | Std | 16AR | Repair and Remanufacture of Drill-through Equipment | 2 | X | ||
CSOEM | RP | 17A | Design and Operation of Subsea Production Systems - General Requirements and Recommendations | 6 | X | ||
CSOEM | TR | 17TR8 | High-Pressure High-Temperature Design Guidelines | 3 | X | ||
CSOEM | TR | 17TR16 | Subsea Hydrocarbon Leak Detection Systems Using Process Data | 1 | X | ||
CSOEM | Std | 17V | Recommended Practice for Analysis, Design, Installation, and Testing of Safety Systems for Subsea Applications | 2 | X | ||
CSOEM | RP | 17S | Recommended Practice for the Design, Testing and Operation of Subsea Multiphase Flow Meters | 2 | X | ||
CSOEM | RP | 11S9 | Safe Handling, Installation, Operation, and Removal of a Permanent Magnet Motor Type Electrical Submersible Pump | 1 | X | ||
CSOEM | Spec | 19G2-A1 | Flow-control Devices for Side-pocket Mandrels | 2 | X | ||
CSOEM | Spec | 19AC | Specification for Completion Accessories | 2 | X | ||
CSOEM | RP | 16Q-A1 | Design, Selection, Operation and Maintenance of Marine Drilling Riser Systems | 2 | X | ||
CSOEM | Std | 2RD | Dynamic Risers for Floating Installations | 3 | X | ||
CSOEM | RP | 5B1 | Gauging and Inspection of Threads for Casing, Tubing, and Line Pipe | 6 | X | ||
CSOEM | RP | 16SB | Snubbing and Hydraulic Workover Well Control Equipment Systems | 1 | X | ||
CSOEM | RP | 13J | Testing of Heavy Brines | 6 | X | ||
CSOEM | RP | 16WS | Surface Well Servicing Pressure Control Equipment | 1 | X | ||
CSOEM | Std | 16CR | Repair and Remanufacture of Choke and Kill Equipment | 1 | X | ||
CSOEM | Spec | 15S | Spoolable Reinforced Plastic Line Pipe | 3 | X | ||
CSOEM | RP | 10B-2 | Testing Well Cements | 3 | X | ||
CSOEM | RP | 13D | Rheology and Hydraulics of Oil-well Drilling Fluids | 8 | X | ||
CSOEM | RP | 10D-2 | Centralizer Placement and Stop -collar Testing | 2 | X | ||
CSOEM | Spec | 2F-A1 | Mooring Chain | 6 | X | ||
CSOEM | Spec | 2H-A1 | Carbon Manganese Steel Plate for Offshore Platform Tubular Joints | 9 | X | ||
CSOEM | Spec | 2SC-A1 | Manufacture of Structural Steel Castings for Primary Offshore Applications | 1 | X | ||
CSOEM | Spec | 2SF-A1 | Manufacture of Structural Steel Forgings for Primary Offshore Applications | 1 | X | ||
CSOEM | Spec | 2W-A1 | Steel Plates Produced by Thermo-Mechanically Controlled Processing (TMCP) for Offshore Structures | 6 | X | ||
CSOEM | Spec | 2Y-A1 | Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures | 5 | X | ||
CSOEM | Std | 20T | Qualification of Manufacturers for Additively Manufactured Polymeric Components for Use in the Petroleum and Natural Gas Industries | 1 | X | ||
CSOEM | Bull | 6J | Testing of Oilfield Elastomers (A Tutorial) | 2 | X | ||
CSOEM | TR | 6MET | Metallic Material Limits for Wellhead Equipment Used in High Temperature for API 6A and API 17D Applications | 3 | X | ||
CSOEM | Spec | 15HR | High-pressure Fiberglass Line Pipe | 5 | X | ||
CSOEM | Spec | 15XX | Specification for Thermoplastic Liners for Oilfield Tubular Goods | 1 | X | ||
CSOEM | RP | 17U | Recommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment | 2 | X | ||
CSOEM | RP | 7G-2-A1 | Inspection and Classification of Used Drill Stem Elements | 2 | X | ||
CSOEM | Spec | 5DP -E1-A1 | Drill Pipe | 2 | X | ||
CSOEM | Spec | 5L-E1-A1 | Line Pipe | 46 | X | ||
CSOEM | TR | 5NCL | Nickel Content Limits for API 5CT Sour Service Products | 1 | X | ||
CSOEM | Spec | 7-2-A1-E1-E2-A2 | Threading and Gauging of Rotary Shouldered Connections (includes Errata 1, August 2017 and Errata 2, November 2019 and Addenda 1, March 2020) | 2 | X | ||
CSOEM | Spec | 5B-A4 | Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads | 16 | X | ||
CSOEM | Spec | 5CT-A2 | Casing and Tubing | 10 | X | ||
CSOEM | Spec | 5L-E1-A1-A2 | Line Pipe | 46 | X | ||
CSOEM | Spec | 5LC-E1-A1 | CRA Line Pipe | 4 | X | ||
CSOEM | Spec | 5LCP-E1-A1 | Specification on Coiled Line Pipe | 2 | X | ||
CSOEM | Spec | 5LD-E1-A1 | CRA Clad or Lined Steel Pipe | 4 | X | ||
CSOEM | Spec | 5ST-A1 | Specification for Coiled Tubing | 1 | X | ||
DPOSC | RP | 92M-A1 | Managed Pressure Drilling Operations with Surface Back-pressure | 1 | X | ||
DPOSC | RP | 92S-A1 | Managed Pressure Drilling Operations – Surface Back-pressure with a Subsea Blowout Preventer | 1 | X | ||
DPOSC | Std | 2CCU | Offshore Cargo Carrying Units | 2 | X | ||
CSOEM | Spec | 5DP -E1-A1-A2 | Drill Pipe | 2 | X | ||
CSOEM | Spec | 7-2-A1-E1-E2-A2-A3 | Threading and Gauging of Rotary Shouldered Connections (includes Errata 1, August 2017 and Errata 2, November 2019 and Addenda 1, March 2020) | 2 | X | ||
CSOEM | Spec | 7V | Drill Stem Valves | 1 | X | ||
CSOEM | TR | 16CV | Charpy V-Notch Location for Weld Qualification | 1 | X | ||
DPOSC | Bull | 100-3 | Community Engagement Guidelines | 2 | X | ||
CSOEM | Spec | 6A-A3 | Specification for Wellhead and Tree Equipment | 21 | X | ||
CSOEM | RP | 15CLT | Recommended Practice for Composite Lined Steel Tubular Goods | 2 | X | ||
CSOEM | Spec | 19V-A1 | Subsurface Completion Isolation (Barrier) Valves and Related Equipment | 2 | X | ||
CSOEM | RP | 19XX | Control Lines and Flat Packs | 1 | X | ||
CSOEM | Spec | 11D1-A1 | Packers and Bridge Plugs | 4 | X | ||
CSOEM | RP | 19GLHB-A1 | Gas Lift Handbook | 1 | X | ||
CSOEM | Spec | 20F | Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries | 3 | X | ||
CSOEM | TR | 6RG1 | BX Gaskets Sensitivity Study | 1 | X | ||
CSOEM | TR | 15TR2 | Alternative Qualification Tests for Spoolable Reinforced Plastic Line Pipe | 1 | X | ||
CSOEM | TR | 17TR17 | Flow Assurance Considerations in Subsea Production Systems | 1 | X | ||
CSOEM | Spec | 4F-A1 | Specification for Drilling and Well Servicing Structures | 5 | X | ||
CSOEM | Spec | 9A-A1 | Specification for Wire Rope | 27 | X | ||
CSOEM | Std | 65-2-A1 | Isolating Potential Flow Zones During Well Construction | 2 | X | ||
CSOEM | TR | 10TR1 | Cement Sheath Evaluation | 3 | X | ||
CSOEM | TR | 10TR9 | Comparison of Atmospheric vs Pressurized Slurry Conditioning for Cements | 1 | X | ||
CSOEM | Spec | 10A-A1-A2 | Cements and Materials for Well Cementing | 25 | X | ||
CSOEM | RP | 5MIF | Mechanical Interference Fit Connections for API Line Pipe | 1 | X | ||
CSOEM | TR | 5SF | Evaluating Connection Performance in Multi-Fractured Horizontal Wells | 1 | X | ||
CSOEM | TR | 5HIC | Hydrogen Induced Cracking for API Line Pipe in Mild Sour Service Conditions | 1 | X | ||
CSOEM | TR | 10TR10 | HTHP Rheology Testing for Cement Slurries | 1 | X | ||
CSOEM | TR | 16G | Well Control Equipment Reliability Modeling | 1 | X | ||
CSOEM | Spec | 16D-A1 | Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | 3 | X | ||
CSOEM | RP | 11ER | Guarding of Pumping Units | 4 | X | ||
CSOEM | Spec | 6DSS-A2 | Specification for Subsea Pipeline Valves | 3 | X | ||
CSOEM | RP | 6HT | Heat Treatment and Testing of Carbon and Low Alloy Steel Large Cross Section and Critical Section Components | 3 | X | ||
CSOEM | Spec | 17D-A1 | Specification for Subsea Wellhead and Tree Equipment | 3 | X | ||
CSOEM | Spec | 17D-A2 | Specification for Subsea Wellhead and Tree Equipment | 3 | X | ||
CSOEM | RP | 17H | Remotely Operated Tools and Interfaces on Subsea Production Systems | 4 | X | ||
CSOEM | RP | 17P | Recommended Practice for Subsea Structures and Manifolds | 3 | X | ||
CSOEM | TR | 10TR8 | Generation and Analysis of Foamed Cements | 1 | X | ||
CSOEM | TR | 21TR1 | Materials Selection for Bolting | 2 | X | ||
CSOEM | Spec | Q2-A1 | Quality Management System Requirements for Service Supply Organizations for the Petroleum and Natural Gas Industries | 2 | X | ||
CSOEM | Spec | 19LH-A1-A2 | Liner Hanger Equipment | 1 | X | ||
CSOEM | Std | 20M | Qualification of Suppliers of Machining Services for Use in the Petroleum and Natural Gas Industries | 2 | X | ||
CSOEM | RP | 2CIM | Offshore Crane Integrity Management | 1 | X | ||
CSOEM | RP | 2D-3 | Offshore Crane Lifting Accessories | 1 | X |
For the best experience, please view on full-size desktop
Committee | Pub. Type | Pub. No | Title | Ed. | Date Published |
---|---|---|---|---|---|
COPM | Ch. | 17.1 | Guidelines for Marine Cargo Inspection | 7 | 02/17/2022 |
COPM | Ch. | 22.1-A2 | Testing Protocols—General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids | 2 | 02/24/2022 |
COPS | RP | 1188 | Pipeline Facility Integrity Management | 1 | 01/11/2022 |
CRE | RP | 579-1 | Fitness-For-Service | 4 | 01/31/2022 |
CRE | Std | 594 | Check Valves: Flanged, Lug, Wafer and Butt-welding | 9 | 02/10/2022 |
CRE | Std | 614 | Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services | 6 | 02/20/2022 |
CRE | Std | 622-A1 | Type Testing of Process Valve Packing for Fugitive Emissions | 3 | 03/23/2022 |
CRE | Std | 667 | Plate and Frame Heat Exchangers for General Refinery Services (Formerly Std. 662, Part 1) | 1 | 03/14/2022 |
CRE | Std | 676 | Positive Displacement Pumps - Rotary | 4 | 02/02/2022 |
CRE | TR | 934-B | Fabrication Considerations for Vanadium-Modified Cr-Mo Steel Heavy Wall Pressure Vessels | 2 | 01/05/2022 |
CSOEM | Bull | 16H | Automated Safety Instrumented Systems for Onshore Blowout Preventer Actuation | 1 | 02/15/2022 |
CSOEM | RP | 13K | Chemical Analysis of Barite | 4 | 03/11/2022 |
CSOEM | RP | 15SA | Integrity Assessment of Spoolable Reinforced Line Pipe | 1 | 02/16/2022 |
CSOEM | RP | 16ST-A1 | Coiled Tubing Well Control Equipment Systems | 2 | 02/04/2022 |
CSOEM | Spec | 15PX | Specification for Crosslinked Polyethylene (PEX) Line Pipe | 2 | 02/08/2022 |
CSOEM | Spec | 7HU2 | Oilfield Hammer Unions | 1 | 03/03/2022 |
CSOEM | TR | 21TR2 | S-N Fatigue Design Guidelines and Test Data for Bolts | 1 | 03/08/2022 |